![]() |
Stop writing those
big oil & gas checks!
Get rid of the smoke, ashes and dirt! |
![]() |
||||||||
|
The
best option is to use our 5-year
Rust Blocker OR you MUST submit a water sample to Wood
Boiler
Solutions LLC annually for professional
lab analysis. Just
purchase the "Water Sample Test Kit" from their store, on page
2 at http://www.diswebsites.com/woodboilersolutions/store.cfm
or you can call them at 920-382-6498 Monday through Friday 9am - 4pm CST
- and they send you out the kit. When
the kit arrives take a sample per the easy to follow directions, package
it up and mail it back (postage not included). They will mail you back
complete results with interpretation and recommendations. (Allow 2
weeks for results) The
following tests are performed and interpreted for you: Nitrite,
pH, Total Dissolved Solids, Bio Test, Iron, Glycol Concentration/Level
(if applicable), and Total Hardness This
testing procedure will give you complete results and recommendations so
you can be assured your system is in top shape for the long haul. This
not only protects your furnace but also protects your heat exchanger
from damage. You
can only burn wood and/or coal in your furnace. Burning any other debris or trash
will void the warranty. We have Shaver Furnaces in service that are over 30 years old, with wood siding (we used to make them that way) - and they're still producing tons of heat today! Terms are subject to change without notice
SHAVER OUTDOOR WOOD FURNACE Since
1972 - 40 Years Strong! |
|
|||||||||
![]() |
![]() ![]() |
![]() |
||||||||
DEALER ENQUIRIES WELCOME!
BTU Load Calculator | Hydronic Wood Furnace | Cost Comparison Chart | Wood Furnace Articles
| Modified
3-11-2013 www.SiteDesignHelp.com © Copyright 1995-2013 |
*Our standard furnace will heat
over 4,000 sq feet Will heat up to 5,000
sq. ft in temperate climates. |