are here to help you any way that we can;
even if you just need advice!
Write to me at: Randy@nextlevelsolutionz.com
or call Randy (608) 519-4664
a Shaver Furnace?
One of the most important things, is how the firebox is made. Most fireboxes are square or rectangular; using six flat slabs of steel and requiring 12 welds to put the firebox together. This is not good because welds are where leaks usually start. We have a round firebox, which is infinitely stronger than any square box will ever be. We only need two welds to put our firebox together; one each end to attach the end plates.
We also have grates in our furnace, which most manufacturers do not have. This allows the ashes the fall into the ash receptacle. On our furnaces we have a separate door to clean out the ashes. This can be done even when there is a raging fire in the firebox.
With all of the other
models, you have to open the firebox door to clean out the ashes. The
other manufacturers wrongfully claim that you can open the firebox
door and clean out the ashes, simply by pushing the burning wood to
the side. This is basically, totally untrue. It is quite difficult to
push the burning logs to the side. Even if you were able to do
so, I guarantee that the firebox is at least 800°°F and up to 2000°F.
There is no way that you are getting anywhere close to the firebox,
without burning yourself, on these other models.
Remember, the 20 year parts AND labor ON-SITE warranty, is probably the best feature because at least 50% of the manufacturers out there require that you ship the furnace back to the factory to get it repaired. Then they have to ship it back and while the repair may be free, they charge you for the shipping both ways AND you have to disconnect the furnace, reinstall it and be without it for 2-4 weeks.
Read the whole article
NH, NY, MD, PA, OR, WA and VT
no longer permit outdoor wood burning furnaces, that are not EPA
You may be able to purchase a coal furnace that does not have to be EPA approved. As far as we can tell, they are okay in PA, IN, NY and VT and may be good in many other states too!
The ThermoWind may be allowed in Indiana and other states because their restrictions seem to be on "boilers", which the ThermoWind, is not.
Out largest furnace is over 300,000 BTUs
LAYAWAY a furnace NOW!
We ship to
your home on our own truck!
To read more, CLICK HERE
Pro Series 165:
YES! We still have our water furnaces!
99% of this website is about
water furnaces and every button on the left side is about water
furnaces - 120 different pages!
Shaver Furnace Video Contest Winner!
1972 - 41 Years Strong!
We will be here when you need us!
Many of our furnaces are still in use today
- after 25 - 30 years in use!
That's why we can confidently give you a
20 Year ON-SITE Warranty!
*Read about the BEST Warranty in the industry!
At least 50% of the manufacturers out there require
you to ship the furnace back to them
and then you have to pay to ship it back to you
and THEN you have to get it back on your pad and reinstall it.
NOT AT SHAVER FURNACE.
If you have a major problem, like a leak, we will wend someone right to you to repair it; saving you hundreds of dollars!
* cylinder/tube thickness
LOCAL DEALER LIST
Please consult the dealer list before ordering from the factory.
We gladly accept Checks by mail and PayPal.
The Best Underground Insulated Pex Pipe for any Outdoor Wood Furnace
Check out The ONLY Fully Automated Stock Trading Software
BTU Load Calculator | Hydronic Wood Furnace | Cost Comparison Chart | Wood Furnace Articles
Wood species BTU comparison
Heating with Wood is Carbon Neutral
Our favorite wood furnace dealer
Download the NEW and FREE Outside Wood Furnace BROCHURE PDF file - 2 pages
PRINT a summary of this website HERE! (16 pages)
Our Favorite Websites
Informative Factual Review of all Wood Burning Boilers - a Canadian Website
Look at this FACEBOOK page
**Rates, terms and conditions subject to change. All financing is based on credit approval.
© Copyright 1995-2014
*Our standard furnace,
the Shaver 165,